Food Truck

Generator size for a small food truck prep setup

Use the default WattSizer rule: add running watts, then model the largest startup load while the other selected loads are already running.

Running watts2,780 W
Starting watts3,800 W
Recommended size4,600 W

The peak-starting assumption is driven by Refrigerator. With the default 20% buffer, WattSizer rounds up to the next 100 watts.

ApplianceRunningStartingSource note
Refrigerator180 W1,200 WDOE appliance-use guidance says sample wattages vary by age and features; default is a conservative planning value for a modern full-size refrigerator.
1,000 W microwave1,500 W1,500 WMicrowave input watts exceed cooking watts; default uses common nameplate input power.
Coffee maker1,000 W1,000 WDOE appliance-use guidance plus typical drip coffee maker nameplates; resistive loads have little extra surge.
Ten LED lights100 W100 WLED bulb wattage is printed on each bulb; default assumes ten mixed fixtures at about 10 watts each.

Try the load yourself

Edit this scenario

Running load0 W
Starting load0 W

Recommended generator0 W
LoadRunning wattsStarting watts

Power station estimate

For battery units, the selected running load needs about 0 Wh for 8 hours or 0 Wh for 12 hours before weather, battery age, and inverter losses.

Safety check

Never operate a fuel-burning generator indoors, in a garage, on a porch, or near open windows. Use a listed transfer switch or interlock installed by a qualified electrician for home wiring, and verify actual device nameplates before buying equipment.

Generator or power station?

Fuel generators are useful for motor loads and longer outages, while battery power stations are better for indoor-safe electronics and medical-device planning. For battery sizing, this selected running load is about 26,700 Wh for 8 hours with the same buffer.

Never operate a fuel-burning generator indoors, in a garage, on a porch, or near open windows. Use a listed transfer switch or interlock installed by a qualified electrician for home wiring, and verify actual device nameplates before buying equipment.